How to intall LED point light

1. Snap screw installation: the snap lock is on the installation wall, and then the lamp can be snapped into the buckle;

2. Snap glue installation: the glue of the external engineering of the snap user is glued to the installation wall, and then the lamp can be snapped into the snap;

3. Snap-pull wire installation: snap into the steel wire, and then the lamp can be snapped into the buckle;

4. Profile lock bracket installation 1): The two mounting brackets are locked on the installation wall according to the spacing, and the lamp is locked on the aluminum profile with screws, and then the profile of the locked lamp is locked on the mounting bracket;

Profile lock bracket installation 2): The two mounting brackets are locked on the installation wall according to the spacing, and the aluminum profile of the lamp is stuck on the aluminum profile with the adjoining buckle, and then the profile of the fixed lamp is locked on the mounting bracket;

Profile lock bracket installation 3): The two mounting brackets are locked on the installation wall according to the spacing, and the lamp with the card lampshade is screwed to the aluminum profile, and then the profile of the fixed lamp is locked on the mounting bracket;

5. Profile lock wall installation 1): use screws to lock the lamp on the aluminum profile, and then lock the profile of the locked lamp on the installation wall;

Profile lock wall installation 2):: use the adjoining bar lamp card aluminum profile, and then lock the profile of the fixed lamp on the installation wall; Profile lock wall installation 3): use the lamp with card lampshade to screw to the aluminum profile, and then lock the profile of the fixed lamp on the installation wall;

6. For non-plane installation, like the cable-stayed large-diameter steel cable on the bridge, it can be installed in a hoop situation: first lock the hoop on the large-diameter steel cable, and then lock the aluminum profile equipped with lamps on the hoop