What kind of LED light will used for the stage

1. Spotlight: it is one of the most widely used main lamps on stage lighting. There are 1KW and 2KW in the market at present, and 2KW is the most widely used lamp.

As the main light source of the stage, it is often used for face light, slap light, side light and other light positions.

2, soft light lamp: the light is soft and symmetrical, which can highlight a certain part, and there is no stiff light spot, which is easy to connect several lights. There are 0.3KW, 1KW, 2KW and so on.

Mainly used for column light, flow light and other close distance light.

3, back light lamp: it is a kind of reflective lamps, which is characterized by hard light quality, high illumination and long range. It is a kind of economic and efficient strong light lamp. The main common ones are 0.5KW, 1KW, 2KW, etc., and the most used in 2KW.

4, astigmatism lamp: light diffuse, uniform, large projection area, divided into day row astigmatism and ground row astigmatism, common 0.5KW, 1KW, 1.25KW, 2KW, etc., mostly used for skylight irradiation, can also be used for the general lighting of the theatre podium.

5. Modeling lamp: between the principle of tracking lamp and spotlight, is a special lamp, mainly used for modeling projection of characters and scenery.

6, foot light lamp (also known as strip lamp) : soft light, wide area.

Mainly used as medium, netscape lighting, cloth color, but also in the position of the table auxiliary surface lighting.

7, light column lamp (also known as down lamp) : currently used more widely, such as PAR46, PAR64 and other models.

It can also be installed directly on the stage and exposed to the audience to form a lamp array for stage decoration and lighting.

8, scene slide and curtain effect lamp: can form the whole picture on the stage curtain, and various special effects, such as: wind, rain, thunder, electricity, water, fire, smoke, cloud and so on.

9, computer lamp: this is a DMX512 or RS232 or PMX signal control of intelligent lamps and lanterns, its light color, light spot, illuminance is better than the conventional lamps and lanterns is developed in recent years a kind of intelligent lamps and lanterns, often installed in the surface light, top light, stage steps and other positions, the color, shape, figure and so on in operation can be programmed to run.

Because the power size is different, it should be used differently on the stage.

General low power computer lamp, only suitable for ballroom use.

In the stage of small power computer lamp light, light spot is often stage spotlight, back light lamp, etc., so in the selection of special attention.

10, chase lamp: is the stage lighting lamps, characterized by high brightness, the use of lens imaging, can present a clear spot, by adjusting the focal length, and can change the spot.

There is a movable light bar, you can easily change color, the lamp body can operate freely, etc.

At present, there are many varieties in the market, and the way of labeling indicators is also different. For example, power is the standard:

1KW halogen tungsten light source, 1KW dysprosium light source, 1KW metal halide light source, 2KW metal halide light source, etc. There are also distance based tracking lamps (light intensity and illumination at a specific distance), such as 8-10m tracking lamp, 15-30m tracking lamp, 30-50m tracking lamp, 50-80m tracking lamp, etc., and they are functionally divided into:

Mechanical tracking lamp, its focus, light bar, color change are manually completed;

Another kind is computer chase lamp, its focus, light bar, change color, adjust color temperature all pass push-pull electric equipment and automatic completion, must choose earnestly to all sorts of indicators when choosing so.

11.Imaging lamp - or shape lamp, ellipsoid spot lamp.

Its beam Angle has a variety of applications can be selected according to need, the main feature is like a slide can cut spot into square, diamond, triangle and other shapes, or projected out of the required various patterns, power also has 1KW, 2KW and other optional configuration.

12.Simple lamp - also known as PAR lamp, or light beam lamp, its structure is in the cylinder according to the mirror bulb is also used to reflect the bromotungsten bubble bowl, the main characteristic is to emit a more fixed beam, beam Angle wide and narrow, the size of the spot can not be adjusted.