Advantage of DMX LED contorller

You can control your LED lighting installation with either DMX or RF (radio frequency controllers. There are a number of benefits in choosing to use DMX over RF controllers with your. It basically comes down to how much flexibility and control you want to have over the settings. For example if you have a lot of different sections across your installation you would have to use multiple RF controllers rather than a single DMX unit.

DMX controllers give you the most control and flexibility. You can create an infinite number of settings and you are able to sync everything up as you please. RF controllers on the other hand come with fixed pre-sets and you can’t change them. Let’s go over the differences in a little more detail.

DMX Control

DMX is a lighting control protocol which is the standard protocol for most of the stage and production lighting today. DMX allows you to customize and infinitely change and modify your lighting sequences as well to have independent control between sections. DMX can be generated with an analog or digital DMX console, or for ultimate versatility and flexibility with a USB to DMX interface and software.

The LED controller, or driver transforms DMX signal into simple voltage which the strips understand and allow the strips to be control via DMX. You can create your own presets which can run on their own, and be changed any time. If you want full control over your LED lighting then the answer is easy, chose DMX control for your installation.